Tuesday, 12 September 2017

Change the output color in shell

red=`tput setaf 1`
reset=`tput sgr0`
echo "${red}Shell programming is cool$reset"

echo "Hello world"



====================================



You can use the awesome tput command (suggested in Ignacio's answer) to produce terminal control codes for all kinds of things.

Usage

Specific tput sub-commands are discussed later.

Direct

Call tput as part of a sequence of commands:
tput setaf 1; echo "this is red text"
Use ; instead of && so if tput errors the text still shows.

Shell variables

Another option is to use shell variables:
red=`tput setaf 1`
green=`tput setaf 2`
reset=`tput sgr0`
echo "${red}red text ${green}green text${reset}"
tput produces character sequences that are interpreted by the terminal as having a special meaning. They will not be shown themselves. Note that they can still be saved into files or processed as input by programs other than the terminal.

Command substitution

It may be more convenient to insert tput's output directly into your echo strings using command substitution:
echo "$(tput setaf 1)Red text $(tput setab 7)and white background$(tput sgr 0)"

Example

The above command produces this on Ubuntu:
Screenshot of colour terminal text

Foreground & background colour commands

tput setab [1-7] # Set the background colour using ANSI escape
tput setaf [1-7] # Set the foreground colour using ANSI escape
Colours are as follows:
Num  Colour    #define         R G B

0    black     COLOR_BLACK     0,0,0
1    red       COLOR_RED       1,0,0
2    green     COLOR_GREEN     0,1,0
3    yellow    COLOR_YELLOW    1,1,0
4    blue      COLOR_BLUE      0,0,1
5    magenta   COLOR_MAGENTA   1,0,1
6    cyan      COLOR_CYAN      0,1,1
7    white     COLOR_WHITE     1,1,1
There are also non-ANSI versions of the colour setting functions (setb instead of setab, and setf instead of setaf) which use different numbers, not given here.

Text mode commands

tput bold    # Select bold mode
tput dim     # Select dim (half-bright) mode
tput smul    # Enable underline mode
tput rmul    # Disable underline mode
tput rev     # Turn on reverse video mode
tput smso    # Enter standout (bold) mode
tput rmso    # Exit standout mode

Cursor movement commands

tput cup Y X # Move cursor to screen postion X,Y (top left is 0,0)
tput cuf N   # Move N characters forward (right)
tput cub N   # Move N characters back (left)
tput cuu N   # Move N lines up
tput ll      # Move to last line, first column (if no cup)
tput sc      # Save the cursor position
tput rc      # Restore the cursor position
tput lines   # Output the number of lines of the terminal
tput cols    # Output the number of columns of the terminal

Clear and insert commands

tput ech N   # Erase N characters
tput clear   # Clear screen and move the cursor to 0,0
tput el 1    # Clear to beginning of line
tput el      # Clear to end of line
tput ed      # Clear to end of screen
tput ich N   # Insert N characters (moves rest of line forward!)
tput il N    # Insert N lines

Other commands

tput sgr0    # Reset text format to the terminal's default
tput bel     # Play a bell
With compiz wobbly windows, the bel command makes the terminal wobble for a second to draw the user's attention.

Scripts

tput accepts scripts containing one command per line, which are executed in order before tputexits.
Avoid temporary files by echoing a multiline string and piping it:
echo -e "setf 7\nsetb 1" | tput -S  # set fg white and bg red

See also

  • See man 1 tput
  • See man 5 terminfo for the complete list of commands and more details on these options. (The corresponding tput command is listed in the Cap-name column of the huge table that starts at line 81.)


========================================


You can use these ANSI escape codes:
Black        0;30     Dark Gray     1;30
Red          0;31     Light Red     1;31
Green        0;32     Light Green   1;32
Brown/Orange 0;33     Yellow        1;33
Blue         0;34     Light Blue    1;34
Purple       0;35     Light Purple  1;35
Cyan         0;36     Light Cyan    1;36
Light Gray   0;37     White         1;37
And then use them like this in your script:
#    .---------- constant part!
#    vvvv vvvv-- the code from above
RED='\033[0;31m'
NC='\033[0m' # No Color
printf "I ${RED}love${NC} Stack Overflow\n"
which prints love in red.

 if you are using the echo command, be sure to use the -e flag to allow backslash escapes.
# Continued from above example
echo -e "I ${RED}love${NC} Stack Overflow"
(don't add "\n" when using echo unless you want to add additional empty line)


================================

# Reset
Color_Off='\033[0m'       # Text Reset

# Regular Colors
Black='\033[0;30m'        # Black
Red='\033[0;31m'          # Red
Green='\033[0;32m'        # Green
Yellow='\033[0;33m'       # Yellow
Blue='\033[0;34m'         # Blue
Purple='\033[0;35m'       # Purple
Cyan='\033[0;36m'         # Cyan
White='\033[0;37m'        # White

# Bold
BBlack='\033[1;30m'       # Black
BRed='\033[1;31m'         # Red
BGreen='\033[1;32m'       # Green
BYellow='\033[1;33m'      # Yellow
BBlue='\033[1;34m'        # Blue
BPurple='\033[1;35m'      # Purple
BCyan='\033[1;36m'        # Cyan
BWhite='\033[1;37m'       # White

# Underline
UBlack='\033[4;30m'       # Black
URed='\033[4;31m'         # Red
UGreen='\033[4;32m'       # Green
UYellow='\033[4;33m'      # Yellow
UBlue='\033[4;34m'        # Blue
UPurple='\033[4;35m'      # Purple
UCyan='\033[4;36m'        # Cyan
UWhite='\033[4;37m'       # White

# Background
On_Black='\033[40m'       # Black
On_Red='\033[41m'         # Red
On_Green='\033[42m'       # Green
On_Yellow='\033[43m'      # Yellow
On_Blue='\033[44m'        # Blue
On_Purple='\033[45m'      # Purple
On_Cyan='\033[46m'        # Cyan
On_White='\033[47m'       # White

# High Intensity
IBlack='\033[0;90m'       # Black
IRed='\033[0;91m'         # Red
IGreen='\033[0;92m'       # Green
IYellow='\033[0;93m'      # Yellow
IBlue='\033[0;94m'        # Blue
IPurple='\033[0;95m'      # Purple
ICyan='\033[0;96m'        # Cyan
IWhite='\033[0;97m'       # White

# Bold High Intensity
BIBlack='\033[1;90m'      # Black
BIRed='\033[1;91m'        # Red
BIGreen='\033[1;92m'      # Green
BIYellow='\033[1;93m'     # Yellow
BIBlue='\033[1;94m'       # Blue
BIPurple='\033[1;95m'     # Purple
BICyan='\033[1;96m'       # Cyan
BIWhite='\033[1;97m'      # White

# High Intensity backgrounds
On_IBlack='\033[0;100m'   # Black
On_IRed='\033[0;101m'     # Red
On_IGreen='\033[0;102m'   # Green
On_IYellow='\033[0;103m'  # Yellow
On_IBlue='\033[0;104m'    # Blue
On_IPurple='\033[0;105m'  # Purple
On_ICyan='\033[0;106m'    # Cyan
On_IWhite='\033[0;107m'   # White
also, you can use three methods: start and reset
\e[0;32m    or \x1b[0;32m    or \033[0;32m    #start
\e[m        or \x1b[m        or \033[m        #reset
Pay attention to reset moods [m or [0m or [0
see this picture
shell:
\e
ASCII hex:
\x1B
\x1b   # but can not write \X1b
ASCII oct:
\033
example_1 with \e:
printf "\e[31;4m Hello \e[0m\n"
example_2 with \x1b:
printf "\x1b[31;4m Hello \x1b[0m\n"
example_3 with \033:
printf "\033[31;4m Hello \033[0m\n"
show color by for structure:
for code in {0..255}; do echo -e "\e[38;05;${code}m $code: Test"; done

and

i=30; while true;do echo -e "$i = \e[0;$[i++]mStackOverFlow\e[m";if [ $i == 49 ];then break;fi; sleep 1;done

and

#!/bin/bash

for (( i = 30; i <= 37; i++ )); 
do echo -e "\e[0;"$i"m  Hi stackoverflow"; 
done
enter image description here


No comments:

Post a Comment